FEED WAGON FIDER
Dane techniczne:
CAPACITY | 7 m3 | 8 m3 | 9 m3 | 10 m3 | 11 m3 | 12 m3 |
---|---|---|---|---|---|---|
Overall height* | 225 cm | 242 cm | 258 cm | 273 cm | 288 cm | 303 cm |
Overall width* | 230 cm | 230 cm | 230 cm | 230 cm | 230 cm | 230 cm |
Power demand* | from 30kW | from 30kW | 40 kW | 40 kW | from 50kW | from 50kW |
Tires | 10.5/75-15.3 | 10.5/75-15.3 | 10.5/75-15.3 | 10.5/75-15.3 | 10.5/75-15.3 | 10.5/75-15.3 |
Drive WOM | 540 obr/min | 540 obr/min | 540 obr/min | 540 obr/min | 540 obr/min | 540 obr/min |
Number of hydraulic outputs | 2 | 2 | 2 | 2 | 2 | 2 |
Min.Oil pump flow | 25l/min | 25l/min | 25l/min | 25l/min | 25l/min | 25l/min |
Standard equipment of the machine:
Tires 10.0/75-15.3 |
Electronic weighing system based on four sensors |
Two-speed gearbox 1:1/1,94:1 |
Transverse floor conveyor based on a PVC belt |
PTO shaft |
Inspection platform |
Mechanically adjustable support foot |
Safety ring to prevent the forage from falling out |
Knife supporting the dumping |
Wheel chocks |
Laser sharpened knives on the auger (hardened) |
It is possible to make the machine according to individual needs!!!
*The manufacturer
reserves the right to change the specification, type and dimensions without prior notice.
Mound-stacker P - 427
The stacker is a machine mounted on the tractor's three-point linkage.
The machine is used for mechanical forming of silage piles and storage mounds.
The machine has an adjustable working depth and adjustable backfilling distances.
It is designed to work on a stone-free surface.
Technical data:
length 75 cm, width 150 cm, weight 360 kg, power requirement 40 kW.
Green fodder cutter T - 635
is a machine attached to the tractor on its upper transport hitch and intended for
single-stage harvesting of low-stemmed plants, intended for direct feeding. Due to the use of a chain
reel in the cutter, the harvested forage does not mechanically damage the harvested fodder and thus
remains fresh after unloading and is eagerly eaten by cattle. The forage cutter is a combination of a
rotary mower with a forage wagon. The cutter is controlled by a four-section hydraulic distributor
mounted on an adjustable bracket.
The manifold enables independent control of:
- the height of the mower
- setting the drawbar in transport or working position
- regulation of the speed of the floor conveyor
- including or only the movement of the floor conveyor
The cutter can be used for single-phase
harvesting of herbs (for drying) and green parts of vegetables.
Technical data:
- length - 630 cm
- width - 210 cm
- working width - 185 cm
- working height - 250 cm
- transport height - 195 cm
- box capacity - 14.5 m3
- power demand above - 30 kW
- machine weight - 1950 kg
- load capacity - 3200 kg
- Tires - 11.5 / 80-15.3.1 12PR
- PTO drive 540 rpm
- upper transport semi-trailer with a minimum pressure of 800 kg
- two hydraulic outputs of the tractor
- oil pump on 25 l / min
The T-635 forage cutter has a CE declaration of conformity
It is equipped with:
- road wheel chocks
- transport line
- drive shafts
The sides of the load box are made of trapezoidal galvanized sheet and its floor is made of specially
profiled steel sheet. For the construction of the floor conveyor, a chain, socket wheels and guide
wheels, similar to those in manure spreaders, were used. the chain used in round balers was used to
build the chain reel.
Green fodder cutter T-635/1
is a machine attached to the tractor on its upper transport hitch and intended for
single-stage harvesting of low-stemmed plants, intended for direct feeding. Due to the use of a chain
reel in the cutter, the harvested forage does not mechanically damage the harvested fodder and thus
remains fresh after unloading and is eagerly eaten by cattle. The forage cutter is a combination of a
rotary mower with a self-collecting trailer. The cutter is controlled by a four-section hydraulic
distributor mounted on an adjustable bracket. The machine in the "compacted" reel version is used for
harvesting herbs and green parts of vegetables.
The manifold enables independent control of:
- the height of the mower
- setting the drawbar in transport or working position
- regulation of the speed of the floor conveyor
- including or only the movement of the floor conveyor
Technical data:
- length - 700 cm
- width - 220 cm
- working width - 185 cm
- working height - 250 cm
- transport height - 195 cm
- box capacity - 19 m3
- power demand above - 50 kW
- machine weight - 2150 kg
- load capacity - 5000 kg
- Tires - 400 / 80-15.3.1 12PR
- PTO drive 540 rpm
- upper transport semi-trailer with a minimum pressure of 800 kg
- two hydraulic outputs of the tractor
- oil pump on 25 l / min
Green fodder cutter T-635/3
is a machine attached to the tractor on its lower transport hitch and intended for
single-stage harvesting of low-stemmed plants, intended for direct feeding. Due to the use of a chain
reel in the cutter, the harvested forage does not mechanically damage the harvested fodder and thus
remains fresh after unloading and is eagerly eaten by cattle. The forage cutter is a combination of a
rotary mower with a forage wagon. The cutter is controlled by a four-section hydraulic distributor
mounted on an adjustable bracket. The machine in the compacted reel version is used for harvesting herbs
and green parts of vegetables
The manifold enables independent control of:
◦ the height of the mower
◦ setting the drawbar in transport or working position
◦ enabling or disabling the floor conveyor movement
◦ engaging or disengaging the mower's clutch
◦ opening or closing the tailgate
Technical data:
- length - 850 cm
- width - 230 cm
- working width - 185 cm
- working height - 275 cm
- transport height - 275 cm
- box capacity - 24 m3
- power demand above - 60 kW
- machine weight - 3160 kg
- load capacity - 8,000 kg
- Tires - 400 / 60-15.5
- PTO drive 540 rpm
- lower transport hitch with a minimum pressure of 1300 kg
- two hydraulic outputs of the tractor
- oil pump on 40 l / min